Features

• Pico 100MHz 700V Differential Probe TA043, 10:1/100:1. Pico TA043 is an active differential probe suitable for high common-mode voltage measurement applications up to ±700V (DC + peak AC). It is capable of acquiring higher speed signals of up to 100MHz. This differential probe ext***s the functionality of standard single-***ed input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low speed balanced differential signals found in serial communications b***s. Bandwidth DC to 100MHz (–3 dB) Attenuation 10:1/100:1 Rise time 3.5ns Accuracy ±2% Input impedance 4MΩ ll 7pF each side to ground Input voltage differential range (10:1) ±70V (DC + peak AC) or 70VRMS Input voltage differential range (100:1) ±700V (DC + peak AC) or 500VRMS Common mode range ±700V (DC + peak AC) or 500VRMS (10:1 and 100:1) Absolute maximum voltage (differential or common mode) 1000VRMS CAT III (10;1 & 100:1) Swing (into 50 kΩ load) ±7V Offset (typical) <±5mV Noise (typical) 0.9mVRMS Source impedance (typical) 50Ω CMRR (typical) 85dB @ 50Hz; 55dB @ 1MHz Ambient operating temperature -10 to +40°C Ambient storage temperature -30 to +70°C Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptor Length of input leads 30cm Length of BNC lead 90cm Weight 500g Dimensions 202 x 83 x 38 mm