
laboratoryinstruments
63-1238-72 High-temperature dryer DRD360DB
Product Description
Product Model: 63-1238-72Product Brand: ADVANTEC Featur […]
Contact Us
Product Details
Product Model: 63-1238-72
Product Brand: ADVANTEC
Features
- A small natural convection dryer that can be ***d up to 650°C.
- The temperature can be set in a wide range of temperatures from [Room temperature +50°C] to 650°C.
- A dedicated cooling fan is built in to keep the exterior surface temperature low even during high temperature operation.
Spec
- convection formula : natural convection type
- Operating temperature range: R.T. + 50 °C, to 650 °C
- Temperature Adjustment Precision: ± 2 °C at 650 °C
- Temperature distribution precision: ± 25 °C at 650 °C
- Temperature rise time: about 120 minutes, from R.T. to 650 °C
- Ambient operating temperature: 5 °C, to 35 °C
- temperature controller: Microcomputer PID Control (TC-SVI System)
- Operation type: Standard Operation, Program Operation (maximum 100 steps) 1 minute, to 99 hours 59 minutes
- Temperature sensor: K class thermocouple
- Heater: Incoloy (R) Sheath Heater
- Heater capacity: 2 kW
- Interior: SUS310 S
- Door Packing: Silicone Rubber * Change to Fluororubber
- Safety device: Self-diagnostic function (Overheating, temperature sensor error, heater disconnection, SSR short circuit, ambient temperature error), indep***ent overheat prevention device, control circuit protection f***, door switch, key lock function, overcurrent/leakage breaker
- inner dimension (Valid Dimensions): W 300 mm x D 300 mm x H 300 mm (H 240 mm)
- external dimensions : W 610 mm x D 680 mm x H 810 mm
- Internal Volume: Approximately 27 L
- number of shelves pitch : 4 stages 60 mm
- Exhaust Port: φ 16 mm
- power supply (50Hz/60Hz): AC100V 21 A
- Required power supply Equipment: AC100V 30 A
- Mass: about 100 kg
- Accessories: shelf board 2 pieces, Shelf Bracket 4 pieces, Fixed metal bracket 4 pieces (Mounting Screw 8 pieces), Vent Lid 1 piece
Related product recommendations
You may also be interested in the following products
65-8673-62 Suction Plug (PTFE Cock) TS Sliding Part 15 Branch Pipe (Rubber Stopper) φ8 mm 055-152T
model: 65-8673-62
brand: NIPPON RIKAGAKU KIKAI
65-0564-20 Trap ball 100 mL TS 15/25 x 15/25
model: 65-0564-20
brand: TOKYO RIKAKIKAI CO., LTD.
62-3782-86 Filter Tip Endotoxin Free, 96 pcs x 10 Racks, 10 μL, Sterilized 790011F
model: 62-3782-86
brand: Sartorius AG