Spec

• Correspondence electrophoretic plate: for M type scratchbuild gel 120mm (W) x 102mm (L), Total 7mm thickness
• P type ready-made gel (pagel series) 120mm (W) x 100mm (L), Total 5mm thickness
• Gel size: 90mm (W) x 80 - 83mm (H) x 1mm (D)
• Number of simultaneous electrophoresis gels: Maximum 2 sheets
• Plate installing system: Katitte seal system
• Plate constant temperature system: Double-sided constant temperature by lower buffer solution.
• Buffer solution capacity: Top 80mL bottom 420mL
• Power settings: Selection of following mode with the select button, Timer dial
• LCD display: Timer setting time, Remaining time, Mode
• Lamp display: Blinking during energization, Fast blinking during errors
• Timer: Continuous/1 - 250 min
• Alarm: When output stops, When time is up, When errors detected
• Safety mechanism Open detection, Short detection
• Eco mode: Automatic transition to low power consumption mode at standby
• Output mode: Standmode gel 1 sheet, 2 sheets
• Highmode gel 1 sheet, 2 sheets
• Lowmode gel 1 sheet, 2 sheets
• Select above, Programmed crossover function
• AC adapter: Input: 100 - 240V supported output: 24VDC/1.5A
• Electrophoresis tank polarity: Automatic polar switching function (upper tank regardless of power connection direction: Cathode, Lower tank: Anode)
• Safety measures: Power-integrated safety cover
• Open error/short error detection
• Main materials: Power unit ABS (case)
• Electrophoresis tank polycarbonate, Silicone
• Body dimensions, mass: Electrophoresis tank: 164mm (W) x 94mm (D) x 193mm (H)
• (When a power unit is installed, Excluding AC adapters, projections
• 0.74kg (excluding AC adapters, electrophoresis plates, etc.)
• Power supply: 100 - 240V 50/60Hz 50VA
• Standard components: Body (M type specification electrophoresis tank, Power unit, AC adapter, extension cord), Dummy plate, Instruction manual: